NAME
bibeclo - BP convergence layer output task using bundle-in-bundle encapsulation
SYNOPSIS
bibeclo peer_EID
DESCRIPTION
bibeclo is a background "daemon" task that extracts bundles from the queues of bundles that are ready for transmission via bundle-in-bundle encapsulation (BIBE) to peer_EID, encapsulates them in BP administrative records of (non-standard) record type 7 (BP_BIBE_PDU), and sends those administrative records in encapsulating bundles destined for peer_EID. The forwarding of BPDUs for which custodial acknowledgment is configured causes bibeclo to post custodial re-forwarding timers to the node's timeline. Parameters governing the forwarding of BIBE PDUs to peer_EID are stipulated in the corresponding BIBE convergence-layer adapter (bcla) structure residing in the BIBE database, as managed by bibeadmin.
The receiving node is expected to process received BIBE PDUs by simply dispatching the encapsulated bundles as if they had been received from neighboring nodes in the normal course of operations; BIBE PDUs for which custodial acknowledgment was requested cause the received bundles to be noted in custody signals that are being aggregated by the receiving node.
bibeclo additionally sends aggregated custody signals in BP administrative records of (non-standard) record type 8 (BP_BIBE_SIGNAL) as the deadlines for custody signal transmission arrive.
Note that the reception and processing of both encapsulated bundles and custody signals is performed by the scheme-specific administration endpoint daemon(s) at the receiving nodes. Reception of a custody signal terminates the custodial re-forwarding timers for all bundles acknowledged in that signal; the re-forwarding of bundles upon custodial re-forwarding timer expiration is initiated by the bpclock daemon.
bibeclo is spawned automatically by bpadmin in response to the 's' (START) command that starts operation of the Bundle Protocol, and it is terminated by bpadmin in response to an 'x' (STOP) command. bibeclo can also be spawned and terminated in response to START and STOP commands that pertain specifically to the BIBE convergence layer protocol.
EXIT STATUS
-
"0"
bibeclo terminated normally, for reasons noted in the ion.log file. If this termination was not commanded, investigate and solve the problem identified in the log file and use bpadmin to restart bibeclo.
-
"1"
bibeclo terminated abnormally, for reasons noted in the ion.log file. Investigate and solve the problem identified in the log file, then use bpadmin to restart bibeclo.
FILES
No configuration files are needed.
ENVIRONMENT
No environment variables apply.
DIAGNOSTICS
The following diagnostics may be issued to the ion.log log file:
-
bibeclo can't attach to BP.
bpadmin has not yet initialized Bundle Protocol operations.
-
No such bibe outduct.
No BIBE outduct with duct name peer_EID exists. Use bpadmin to stop the BIBE convergence-layer protocol, add the outduct, and then restart the BIBE protocol.
-
No such bcla.
No bcla structure for the node identified by peer_EID has been added to the BP database. Use bpadmin to stop the BIBE convergence-layer protocol, use bibeadmin to add the bcla, and then use bpadmin to restart the BIBE protocol.
-
CLO task is already started for this duct.
Redundant initiation of bibeclo.
-
Can't dequeue bundle.
BIBE outduct closed deleted or other system error. Check ION log; correct the problem and restart BIBE.
-
[i] bibeclo outduct closed.
Nominal shutdown message.
-
Can't prepend header; CLO stopping.
System error. Check ION log; correct the problem and restart BIBE.
-
Can't destroy old ZCO; CLO stopping.
System error. Check ION log; correct the problem and restart BIBE.
-
Can't get outbound space for BPDU.
System error. Check ION log; correct the problem and restart BIBE.
-
Can't send encapsulated bundle.
System error. Check ION log; correct the problem and restart BIBE.
-
Can't track bundle.
System error. Check ION log; correct the problem and restart BIBE.
-
[!] Encapsulated bundle not sent.
Malformed bundle issuance request, which might be a software error. Contact technical support.
-
Can't release ZCO; CLO stopping.
System error. Check ION log; correct the problem and restart BIBE.
-
[i] bibeclo duct has ended.
Nominal shutdown message.
BUGS
Report bugs to <https://github.com/nasa-jpl/ION-DTN/issues>
SEE ALSO
biberc(5), bibeadmin(1)